EN6000B6 Series Multichannel Measuring Instrument

    The EN6000B6/B6C series instrument is a multichannel measurment instrument, which is offered with two alternative display types: Digital or OLED. It is suited for measurement, display and alarm multichannel signals at the place of work.
 
Function Characteristics

  Universal signal input function: The instrument can receive varieties of signal including standard current, standard voltage, standard thermal resistor, standard thermocouple, etc; No jumper is needed; setup of the internal parameters is all that is needed using preselected options between a variety of common signals.

  Extended alarm function: There are two alarm types available: Unified and Independent.

  Standard casing size: There are three panel sizes (160mm×80mm, 80mm×160mm, 96mm×96mm) available so an instrument with similar simple functions can be substituted.

  Communication function: A RS485 communication interface is available (as an option) to form a computer monitoring system based on multiple instruments and a PC that has the bus characteristics defined by the ENVADA communication protocol (supported by many host computer configuration software) or MODBUS protocol allowing the functional operation of a instrument to be carried out on a host computer seemlessly. The user can choose a communication rate among 2400, 4800, 9600, 19200bps. The standard communication software operated in a PC is available.

  Advanced parameter protection function: A parameter protection function can be set to avoid any illegal operation.



Product Type

1

EN6000B6-1/ EN6000B6C-1

8 input channels without alarming

2

EN6000B6-2/ EN6000B6C-2

8 input channels with unifined alarming

3

EN6000B6-3/ EN6000B6C-3

8 input channels with independent alarming

4

EN6000B6-4/ EN6000B6C-4

16 input channels without alaming

5

EN6000B6-5/ EN6000B6C-5

16 input cfhannels with unifined alaming

6

EN6000B6-6/ EN6000B6C-6

16 input channels with independent alarming

7

EN6000B6-7/ EN6000B6C-7

24 input channels without alarming

8

EN6000B6-8/ EN6000B6C-8

24 input channels with unifined alarming

9

EN6000B6-9/ EN6000B6C-9

24 input channels with independent alarming




Main Technological Specification

 

Input Signals

Channel Number: 8, 16, 24

Voltage: 0-20mV, 0-80mV, －20-20mVDC, －100-100mVDC, 0-500mVDC，0-1000mVDC, 0-50VDC, 0-5VDC, 1-5VDC and 0-10VDC

Current: 0-10mA、4-20mA、0-20mA

RTD: S、B、T、R、K、E、J、N、W

Thermocouple: Pt100, Cu100, Cu50

Current input signal impedance 5Ω; Other input signal impedance 600KΩ Average circulating check frequency: 2-4 channel/s

Output Signals

Current Retransmission Output

Relay Contact

Display

Screen: 128×64 dot matrix OLED screen

Parameter setting: －99999-999999(7 digits, including decimal)

Measurement display: －99999-999999 (6 digits, including decimal)

Communication

RS232: One instrument; RS485: a maximum of 255 instruments Baud rate: 2400, 4800, 9600, 19200 bps (set by user)

Measuring Accuracy ±0.2FS
Feeding Isolated 24VDC/30mA output feed
Protection Mode Auto restoration from an abnormal working state, and the setup parameter and history data are automatically stored and will not be lost in power-off. Fault code directive, multiple alarm modes and multi-level parameter protection are available

Power Supply

100-240VAC（-15%-+10%） 50/60Hz或24VDC（-15%-25%）

Power Dissipation

<5W

Working Condition

Temprature: 0~50 ℃    Humidity: 5-85%RH
Continual vibration: Amplitude in X, Y and Z＜1mm, Frequency＜50Hz

Transport & Storage

Temprature: -25~75 ℃   Humidity: 5-95%RH
Casing Size 160mm×80mm (opening depth 105mm), 80mm×160mm (opening depth 105mm), 96mm×96mm (opening depth 105mm)



Classification