EN6000B3 Series Panel Meters

EN6000B3 Series Panel Instrument

The EN6000B3 series instrument is a digital display instrument, that provides a variety of scaleable output options, multiple display modes and bar chart displays. It can process 1 or 2 input channels and is suited for acquisition, display, remote-transmission and the processing of individual signals. There are many useful functions including communication function, retransmission function, print function, alarm function, etc.

	Function Characteristics

  Universal input: No jumper is needed; Only simply setting the internal parameter can the transfer be carried out among a variety of common signals.

  Instrument display: An OLED screen is used that has high brightness, high resolution and wide angle of vision. It displays hint messages, setup parameters, control messages, engineering units, alarm states, etc.

  Complete counter size: There are varieties of contour sizes and many display modes including a large LED screen, the bar chart with a light bar, etc available.

  Multi-way alarming outputs available. Each way has many alarming modes including the high limit alarming, the low limit alarming, the break-off alarming and so on.

  Communication function: A RS485 communication interface is available (as an option) to form a computer monitoring system based on multiple instruments and a PC that has the bus characteristics defined by the ENVADA communication protocol (supported by many host computer configuration software) or MODBUS protocol allowing the functional operation of a instrument to be carried out on a host computer seemlessly. The user can choose a communication rate among 2400, 4800, 9600, 19200bps. The standard communication software operated in a PC is available.

  Advanced parameter protection function: A parameter protection function can be set to avoid any illegal operation.

	Product Type

1	EN6000B3-1 Single Channel LED Display Meter	One input channel. The input signal can choose an analog signal (universal input or fixed type input) or a frequency signal input.
2	EN6000B3-2 Single Channel LED Display Meter	Two input channels. Providing 6 function modules to carry out the functions including the retransmission function, the RS485/RS232 communication function, the feeding output of 24VDC function, the print function, the alarming output function, etc. The universal analog signal can be received, and a channel can be chosen to receive a frequency signal input.
3	EN6000B3-3 Dual-channel LED display meter with calculation function	Adding a calculation function of plus、minus、multiply and device between two channels based on EN6000B3-2.

	Main technological specification

Input Signals	Voltage	-20~20mVDC，-100~100mVDC，0~100mVDC，0~500mVDC，0~1000mVDC，0~5VDC，1~5VDC，0~10VDC
	Current	0-10mA、4-20mA、0-20mA
	RTD	Pt100, Cu100, Cu50
	Thermal Couple	S, B, R, T, K, E, J, N, W
	Resistance	0-350Ω
	Frequency	0—5KHz active (high electrical level: 4—24V, low electrical level: 0—2V)
Output Signals	Linear Current Output	4-20mA、0-20mA(maximum load 500Ω )、0-10mA(maximum load1kΩ)
	Relay contact output	250VAC/1A or 30VDC/1A， resistant load
	SSR driving voltage	Von：13±2VDC（the electric current is less than 30mA） Voff≈0.1VDC
Accuracy	0.2%FS
Feeding	Isolated 24VDC/30mA output
Communication	RS232(individual meter)、RS485（100 meters at most）
Display	PV display: 4-bit red LED SV display: 4-bit green LED Stick Diagram: 20 section red LED		Display resolution：0.001,0.01,0.1,1 word Display cycle: 0.5 second Display area：－10.0% ~ 110%
Woking Power	100~240VAC（-15% +10%） 50/60Hz 或 24VDC（-15% +25%）
Power Dissipation	< 5W
Working Condition	Temprature: 0~50 ℃ Humidity: 5-85%RH Continual vibration: Amplitude in X, Y and Z＜1mm, Frequency＜50Hz
Storage Condition	Temprature: -25~75 ℃ Humidity: 5-95%RH
External Dimension	W×H（mm）72×72、48×96、96×48、96×96、80×160、160×80

	Classification