EN6000B2 OLED Display Single Loop Digital Controller

    The EN6000B2 series instrument is an OLED display single loop controller, which is an updated version of the EN6000B1, with higher acquisition speed and accuracy. The OLED dot matrix screen display delivers high brightness, high resolution and a wide angle of vision, and can display many messages for ease of use.

Function Characteristics

  Universal signal input function: Universal signal input function namely the controller can receive varieties of signal including standard current, standard voltage, standard thermal resistor, standard thermal couple, etc; No jumper is needed; Only simply setting the internal parameter can the transfer be carried out among a variety of common input signals.

  Providing one PID control output; Using an advanced self-adaptive algorithm; Identifying and adjusting the control mode automatically according to the features of different controlled objects; Calculating the best regulation parameter; Carrying out a no overshooting and no undershooting system easily and suppressing disturbance quickly.

  Flexible control mode: Many output control modes available including the one/three-phase SCR zero-crossing/ phase-shifting, the relay, the SSR driver, the current, etc so suited for a variety of control places.

  Many alarming modes including the high limit alarming, the low limit alarming, the high deviation alarming, the low deviation alarming, the inner deviation alarming, the outer deviation alarming, the over-range alarming, etc, and the stand-by alarming function and so on are available.

  Instrument display: An OLED screen is used that has high brightness, high resolution and wide angle of vision. It displays hint messages, setup parameters, control messages, engineering units, alarm states, etc.

  Communication function: A RS485 communication interface is available (as an option) to form a computer monitoring system based on multiple instruments and a PC that has the bus characteristics defined by the ENVADA communication protocol (supported by many host computer configuration software) or MODBUS protocol allowing the functional operation of a instrument to be carried out on a host computer seemlessly. The user can choose a communication rate among 2400, 4800, 9600, 19200bps. The standard communication software operated in a PC is available.

  Advanced parameter protection function: A parameter protection function can be set to avoid any illegal operation.



Product Type

1

EN6000B2-1

Fixed-value standard OLED controller

2

EN6000B2-2

Fixed-value motor positive-negative rotating OLED controller

3

EN6000B2-3

Programmable standard OLED controller

4

EN6000B2-4

Programmable motor positive-negative rotating OLED controller

5

EN6000B2-5

Fixed-value heating and refrigerating dual output OLED controller

6

EN6000B2-6

Programmable heating and refrigerating dual output OLED controller

7

EN6000B2-7

Head control direct-through standby OLED controller



Main technological specification

Input Signals

Voltage

-20~20mVDC，-100~100mVDC，0~100mVDC，0~500mVDC，0~1000mVDC，0~5VDC，1~5VDC，0~10VDC

Current

0-10mA、4-20mA、0-20mA

RTD

S、B、T、R、K、E、J、N、W

Thermal Couple

Pt100，Cu100，Cu50

Resistance

0.1~3 KΩ

Output Signals

Current(linear)、Relay、Controlled silicon、SSR driving voltage

Measuring Accuracy

0.2%FS

Feeding

Isolated 24VDC/30mA output

Communication

RS232(individual meter)、RS485（100 meters at most）

Display

Screen: 128×64 dot matrix OLED screen

Display resolution：0.001,0.01,0.1,1 word
Display cycle: 0.5 second
Display area：－10.0% ~ 110%

Working Power

100~240VAC（-15% +10%） 50/60Hz or 24VDC（-15% +25%）

Power Dissipation

< 5W

Working Condition

Temprature: 0~50 ℃    Humidity: 5-85%RH
Continual vibration: Amplitude in X, Y and Z＜1mm, Frequency＜50Hz

Storage Condition

Temprature: -25~75 ℃   Humidity: 5-95%RH

External Dimension

W×H（mm）96×96、80×160、160×80



Classification